Shockwave Build Blog
First Shots
The robot took its first shots today, shooting racquetballs. The robot shot extremely far, with distances yet to be officially measured.
For today’s shots, the robot’s tanks were filled by a shop compressor in the lab to approximately 100 psi. Early next week, we hope to start powering the shots off of the SCUBA tank.
Robot Complete
After more than two months of hard work, Team 254’s T-Shirt Cannon is complete.
Today, we recieved the parts neccesary for us to fill our high-pressure SCUBA tank. After filling the tank, we tested the robot extensively to determine how many shots could be taken on a single air fill. On one air fill, the robot can shoot more than 200 shots, well above our initial estimates.
We are very pleased with how the robot turned out and look forward to using it to promote our team, our school, our sponsors and our community.
Bellarmine Spirit Rally
The T-Shirt Cannon made its debut tonight at the Bellarmine Spirit Rally. Set before the school’s football game against its rival, St. Francis of Mountain View, the rally aims to boost school spirit and morale before the game.
The T-Shirt Cannon came out in the middle of the rally and shot 30 T-Shirts at students stationed across the gym. The students aimed to catch the T-Shirts in trash cans in order to win spirit points.
The rally was a great success and the T-Shirt Cannon was a huge hit!
About Shockwave
In Summer 2010, Team 254 decided to build a T-Shirt Shooting Robot to be used for promotional events. After two months of hard work, our robot debuted at a spirit rally at our school, Bellarmine College Prep in San Jose. The robot was received very well and was loved by the students at the rally.
Team 254 plans to use its T-Shirt Cannon Robot to promote the team and its sponsors. We will be bringing the cannon to team and school events as well as sponsor events.
For detailed information about the design and build process as well as the cannon’s technical specifications, please visit the following pages:
Technical Specifications
Features:
- Ten Barrel Revolver/Gatling Action
- Automatic Barrel Indexing
- Motorized Adjustable Pitch – Horizontal to +60 degrees
- Adjustable Range Control Via Electronic Solenoid Valve
- Six-Wheel Drive, Off-Road Capable Chassis
- Wireless Control
- Capable of launching 3+ T-Shirts per second
- Also Capable of launching racquetballs or hacky sacks
Technical Specifications:
General
- Dimensions: 28″ Wide, 38″ Long, 18″ Tall
- Weight: 160 Pounds
- Top Speed: 12+ Feet Per Second
- Capacity: 200+ Shots per Tank
- Projectile Range: 150+ Yards
Mechanical
- Qty 10 – 2.5″ OD, 2.375″ ID Barrels x 24″ Long
- Globe Motor Barrel Revolver Mechanism
- Van Door Motor Pitch Adjustment
- Pneumatic Cylinder Indexing/Lock
- Gas Spring Assisted Pitch
- High Pressure SCUBA Tank Reservoir at ~3300 psi
- Low Pressure Regulated SCUBA Tank Accumulator at ~120 psi
- 1″ NPT MAC Solenoid Valve at ~17.0 cV Flow Capacity with a 23 ms Response Time
- Norgren Low Pressure Regulator for Cylinder Indexing
- H2Oddysey Tank Mounted SCUBA Regulator
Electrical
- Power Source: 12 Volt, 17 AH SLA Motorcycle Battery
- Controller: VEX PIC Micro-controller with VEXNet
- Wireless Protocol: 802.11 g Wi-Fi @ 2.4 ghz
- VEX Pro Victor Speed Controllers
- VEX Pro Spike Relay Modules
- 12 Volt MAC Solenoid Valve for T-Shirt Launching
- 12 Volt Rexroth Solenoid Valve for Cylinder Indexing
San Jose Sharks Street Rally
Team 254’s T-Shirt Cannon made an appearance in San Jose today at a Street Rally for the San Jose Sharks, a professional hockey team. The Sharks play their first home game today against the Atlanta Thrashers and celebrated the occasion with a pre-game street rally.
The rally was a ton of fun and the robot was quite popular.
The T-Shirt Cannon at Your Event
Team 254 is willing and able to bring our T-Shirt cannon to many events, including but not limited to:
- Sporting Events
- Spirit Rallies
- Community Events
The T-Shirt Cannon can be branded to meet the promotional requirements of any sponsor.
To Request to have the T-Shirt Cannon appear at your event, please contact our PR Director, Godwin Vincent.
Shockwave Wins the Abbott Invention Hall of Fame Award
Shockwave, a promotional t-shirt shooting robot, was awarded the Abbott Invention Hall of Fame Award at the 2011 FIRST Silicon Valley Regional.
